JUKI LBH-1790 Instruction Manual page 93

Error
code
E0
E0
E0
E0
E0
E0
E0
E0
Description of error
Memory switch data error
When memory switch data is broken or revision is old.
Sewing data error
When sewing data is broken or revision is old.
Interference of knife lowering command with thread
trimming motion
When inserting position of knife command is improper
and knife command interferes with thread trimming
motion in case of motion from external data.
Confirmation of tilt of machine head
When tilt of machine head sensor is OFF.
Main shaft semilunar plate sensor error
Semilunar plate of sewing machine motor is abnormal.
Cloth cutting knife sensor error
When knife is held lowered or sensor is not OFF when
knife is lowered.
Copy disapproval error
When trying to perform copying to the pattern No.
which has been registered.
: In case of
continuous
stitching
Pattern deletion error
When trying to perform deletion in case the remaining
pattern No. which has been registered is only one.
: In case of
continuous
stitching
–  –
How to
recover
Turn OFF the
power.
Turn OFF the
power.
Possible to
re-start after
reset.
Possible to
re-start after
reset.
Turn OFF the
power.
Turn OFF the
power.
Possible to
re-start after
pressing
cancel button.
: In case of cycle
stitching
Possible to
re-start after
pressing
cancel button.
: In case of cycle
stitching
Place of
recovery
Data input
screen
Data input
screen
Pattern list
screen
Pattern list
screen