JUKI LBH-1790 Instruction Manual page 71

Button and display
A CYCLE DATA NAME display
B KNIFE CANCEL button
C PRESSER DOWN button
D BOBBIN WINDER button
E CYCLE DATA NO. display
F SEWING PRODUCT display
G STEP STITCHING button
H SEWUNG ORDER display
I1 COUNTER VALUE CHANGE button
I2 COUNTER CHANGE OVER button
J PATTERN NO. display
K NEEDLE THREAD TENSION
CHANGE button
L NUMBER OF TOTAL STITCHES
display
M OVEREDGING WIDTH, LEFT display Overedging width, left which is set to the pattern data during sewing is
N SPEED variable resistor
O WITH/WITHOUT DOUBLE
STITCHING display
P NUMBER OF TIMES OF DOUBLE
STITCHING display
Name inputted in cycle data during sewing is displayed.
Every time the button is pressed, dropping/non-dropping knife is
changed over alternately.
Presser can be lowered and the knife down screen is displayed.
To raise the presser, press the presser up button displayed in the
presser down screen.
＊ When performing threading in this state, turn OFF the power before
performing.
Bobbin thread can be wound.
11. WINDING BOBBIN THREAD,
→ Refer to
Cycle data No. during sewing is displayed.
Image of sewing product is displayed.
When the button is pressed, the step stitching screen to check the
needle entry point and to perform re-sewing is displayed.
10. PERFORMING RE-SEWING,
→ Refer to
Sewing order of inputted pattern data is displayed. Pattern data during
sewing is displayed in blue color.
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
→ Refer to 12. USING COUNTER, p.
Display of sewing counter/No. of pcs. counter can be changed over.
12. USING COUNTER, p.
→ Refer to
Pattern No. during sewing is displayed.
Needle thread tension inputted in the pattern data during sewing is
displayed.
When the button is pressed, the needle thread tension change screen
is displayed.
Number of total stitches of the pattern data during sewing is displayed.
displayed.
Number of rotation of the sewing machine can be changed.
With/without double stitching which is set to the pattern data during
sewing is displayed.
Number of times of basting which is set to the pattern data during
sewing is displayed.
– 70 –
Description
p.29.
p.27.
30.
30.