JUKI LBH-1790 Instruction Manual page 86

Item
KNIFE CYLINDER LOWERING TIME
(OPTIONAL)
Y-feed motor origin compensation
Needle-rocking motor origin
compensation
Presser lifter motor origin
compensation
Display/Non-display of direct button
: Display
Thread trimming on the way in continuous
stitching Permitted/ Prohibited.
In case of prohibited, jump feed setting becomes
invalid, and the registered pattern is sewn at the same
position. Then multi-sewing is possible.
: Permitte
Changeover of cloth cutting knife
return power
This item sets output power at the time of
returning the cloth cutting knife.
Release amount of bobbin thread
trimmer at the start of sewing
This item sets the amount of releasing
the bobbin thread trimmer at the start of
sewing.
Presser lifter speed selection
Setting range
 to 00
-0 to 00
-0 to 0
-00 to 0
---
: Non-
display
---
: Prohibit
0 to 
 to 
 to 
–  –
Edit unit Initial display
ms 0
 pulse 0
(0.0 mm)
 pulse 0
(0.0 mm)
 pulse 0
(0.0 mm)
--- Non-display
--- Permitted
 0
 pulse