JUKI LBH-1790 Instruction Manual page 123

Information on the following  items are displayed in the working measurement screen.
A : The information is automatically displayed from
the time of start of measuring the working ratio.
B : The information is automatically displayed from
the time of start of measuring the machine speed.
C : The information is automatically displayed from
the time of start of measuring the pitch time.
D : The information is automatically displayed from
the time of start of measuring the machine time.
E : Number of times of thread trimming is displayed.
Input the number of times referring to the next 3
3 Input the number of times of thread trimming.
Next, input the number of times of thread
trimming per process. When number of times of
thread trimming button
page is pressed, the number of times of thread
trimming input screen is displayed.
Input the value you desire with ten keys or UP/
DOWN buttons.
After the input, press ENTER button
※ When the input value is 0, count of the number
of times of thread trimming is not performed. Use
this function by connecting the external switch.
(E) in the previous
(F).
–  –
A
C
B
D
E
F