Standard Horizon QUANTUM GX6500E Owner's Manual page 91

DSC Position Report Call by Manually Entering an MMSI
This feature allows you to send your position to another vessel by manually
entering the MMSI of the ship you want to send your position to.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "DSC CALL", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "POS REPORT
CALL", then press the [SELECT] soft key. (To cancel,
press the [BACK] soft key.)
4. Rotate the DIAL/ENT knob to select "MANUAL", then
press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select the first number
of the MMSI which you want to contact, then press
the [SELECT] soft key to step to the next number.
6. Repeat step 5 to set the MMSI number.
If a mistake was made entering in the MMSI number,
rotate the DIAL/ENT knob to select "←" or "→", press
the [SELECT] soft key until the wrong character is
selected, then perform step 5.
7. When finished entering the MMSI number, press the [FINISH] soft key.
8. If you want to change the position displayed, press the [POS/TM] soft key
to go to the position information input screen. After inputting new position
information, press the [FINISH] soft key to confirm.
9. Press the [YES] soft key to send your position to the
selected vessel.
10. Press the [QUIT] soft key to return to radio operation.
GX6500E/GX6000E Page 91