Standard Horizon QUANTUM GX6500E Owner's Manual page 78

3. Rotate the DIAL/ENT knob to select "DSC SETUP",
then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "GROUP DIREC-
TORY", then press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select "ADD", then press
the [SELECT] soft key.
6. Rotate the DIAL/ENT knob to select "GROUP NAME:",
then press the [SELECT] soft key.
7. Rotate the DIAL/ENT knob to scroll through the first
letter of the name of the group you want to reference
in the directory.
8. Press the [SELECT] soft key to store the first letter
in the name and step to the next letter to the right.
9. Repeat steps 7 and 8 until the name is complete. The name can consist of
up to fifteen characters, if you do not use all eleven characters, select "→"
to move to the next space. This method can also be used to enter a blank
space in the name.
If a mistake was made entering in the name, rotate the DIAL/ENT knob to
select "←" or "→", press the [SELECT] soft key until the wrong character
is selected, then perform steps 7 and 8.
10. When finished entering the group name (using fifteen characters or less),
press the [FINISH] soft key to advance to the group MMSI number entry.
Page 78 GX6500E/GX6000E