Standard Horizon QUANTUM GX6500E Owner's Manual page 108

Navigation by Manually Entering a Waypoint
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "NAVI", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "WAYPOINT", then
press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "MANUAL", then
press the [SELECT] soft key.
5. If you want to give the waypoint an easy-to-find name,
rotate the DIAL/ENT knob to select "NAME:", press the
[SELECT] soft key, then enter the name. For details,
refer to "10.4.1 Setting up the Individual / Position
Call Directory".
6. Rotate the DIAL/ENT knob to select "POSITION:",
then press the [SELECT] soft key.
7. Rotate the DIAL/ENT knob to select the first number
of latitude, then press the [SELECT] soft key to step
to the next number.
8. Repeat step 7 to set the position.
If a mistake was made, rotate the DIAL/ENT knob to
select "←" or "→", press the [SELECT] soft key until
the wrong character is selected, then perform step 7.
9. When finished programming the position, press the [FINISH] soft key. The
display will return to the previous screen.
10. Rotate the DIAL/ENT knob to select "SAVE & GOTO",
then press the [SELECT] soft key. To set the Waypoint
as a temporary destination without saving and start
the navigation, select "GOTO" and press the [SELECT]
soft key.
Page 108 GX6500E/GX6000E
c