Standard Horizon QUANTUM GX6500E Owner's Manual page 144

4. Rotate the DIAL/ENT knob to select "STATION NAME",
then press the [SELECT] soft key.
5. With the second station microphone connected, rotate
the DIAL/ENT knob to select the unit to be named,
then press the [SELECT] soft key.
6. Rotate the DIAL/ENT knob to select to scroll through
the first letter of the new station name.
7. Press the [SELECT] soft key to store the first letter
in the name and step to the next letter to the right.
8. Repeat steps 6 and 7 until the name is complete. The
name can consist of up to ten characters, and if you
do not use all ten characters, select "→" to move to
the next space. This method can also be used to enter
a blank space in the name.
If a mistake was made entering in the station name, rotate the DIAL/ENT
knob to select "←" or "→", press the [SELECT] soft key until the wrong
character is selected, then perform steps 6 and 7.
9. When finished entering the station name (using ten characters or less),
press the [FINISH] soft key to advance to the second station name entry.
10. Rotate the DIAL/ENT knob to select "SSM-70H", then
press the [SELECT] soft key.
11. Rotate the DIAL/ENT knob to select to scroll through
the first letter of the new station name.
12. Press the [SELECT] soft key to store the first letter
in the name and step to the next letter to the right.
13. Repeat steps 11 and 12 until the name is complete.
The name can consist of up to ten characters, and if
you do not use all ten characters, select "→" to move
to the next space. This method can also be used to
enter a blank space in the name.
If a mistake was made entering in the station name, rotate the DIAL/ENT
knob to select "←" or "→", press the [SELECT] soft key until the wrong
character is selected, then perform steps 11 and 12.
14. When finished entering the station name (using ten characters or less),
press the [FINISH] soft key.
15. Press the CLEAR key to return to radio operation.
Page 144 GX6500E/GX6000E