Standard Horizon QUANTUM GX6500E Owner's Manual page 65

[PAUSE]: Press this key to temporarily disable automatic switching to
Channel 16.
[QUIT]: Press this key to quit the automatic Channel 16 switching and revert
to the last selected working channel.
4. After accepting the call, press the [TO WPT] soft
key to set the vessel in distress as a destination for
navigation.
Note: You may change the waypoint name.
5. Rotate the DIAL/ENT knob key to select "SAVE &
GOTO", then press the [SELECT] soft key to replace
the display to the waypoint screen. The display indi-
cates the distance and direction of the distressed
vessel, and also the compass indicates the distressed
vessel by dot ().
6. To stop navigating to a waypoint, press one of the
soft keys, then press the [STOP] soft key. The radio
is switched to the normal mode.
• You must continue monitoring Channel 16 as a coast station may
require assistance in the rescue attempt.
• When there is an unread distress alert, "
display. You may review the unread distress alert from the DSC log, refer
to the section "10.11.2 Reviewing a Logged DSC RX Distress Call".
• Not all DSC radios can receive a DSC distress relay call.
GX6500E/GX6000E
NOTE
" icon will appear on the
Page 65