Standard Horizon QUANTUM GX6500E Owner's Manual page 121

6. Rotate the DIAL/ENT knob to select "NAME:", then
press the [SELECT] soft key.
7. Enter the route name by rotating the DIAL/ENT knob
and the [SELECT] soft key.
When finished entering the name (using ten charac-
ters or less), press the [FINISH] soft key.
8. Rotate the DIAL/ENT knob to select "GM ID:", press
the [SELECT] soft key, then enter the group MMSI
number.
When finished entering the MMSI, press the [FINISH]
soft key.
9. Rotate the DIAL/ENT knob to select "MEMBER", then
press the [SELECT] soft key.
10. Rotate the DIAL/ENT knob to select a list number,
then press the [SELECT] soft key.
11. Rotate the DIAL/ENT knob to select a member from
the Individual directory, then press the [SELECT] soft
key.
12. Repeat steps 11 to add members to the group, then
press the [BACK] soft key.
13. Press the [BACK] soft key to return to the "NAME:"
and "GM ID:" screen.
14. Rotate the DIAL/ENT knob to select "SAVE" to store
the data, then press the [ENTER] soft key.
15. To enter another group directories, repeat steps 5
through 14.
16. Press the CLEAR key to return to radio operation.
GX6500E/GX6000E Page 121