Standard Horizon QUANTUM GX6500E Owner's Manual page 31

The GX6500E/GX6000E has a GPS status display
which shows the satellites currently being received,
along with a graphical (bar-graph) representation of the
relative signal strengths from the satellites.
For the GX6500E/GX6000E to properly show the GPS status page
when an external GPS antenna or a chart plotter is connected it must
be setup to output GSA and GSV NMEA 0183 sentences.
1. Press and hold the
2. Press the MENU key to display "MENU".
3. Rotate the DIAL/ENT knob to select "GPS", then press
the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "GPS STATUS",
then press the [ENTER] soft key to display the GPS
status currently being received.
5. Press the CLEAR key to return to radio operation.
When the GX6500E/GX6000E is first turned on, it may take several
minutes to compute a fix of your position. This is normal, as the
GX6500E/GX6000E is downloading "almanac" information from the
GPS satellites.
GX6500E/GX6000E
NOTE
key to turn the radio on.
NOTE
(gps s D
tatus isplay MoDe
Page 31
)