8. Press the [QUIT] soft key to return to radio operation.
If the GX6500E/GX6000E does not receive position data from the polled
vessel, the display will show "NO POSITION DATA".
Position Request by Manually Entering an MMSI
This feature allows you to request the position of a vessel by manually enter-
ing the MMSI.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "DSC CALL", then
press the [SELECT] soft key
3. Rotate the DIAL/ENT knob to select "POS REQUEST
CALL", then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "MANUAL", then
press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select the first number
of the MMSI (nine digits) which you want to contact,
then press the [SELECT] soft key to step to the next
number.
6. Repeat step 5 to set the MMSI number.
If a mistake was made entering in the MMSI number, rotate the DIAL/ENT
knob to select "←" or "→", press the [SELECT] soft key until the wrong
character is selected, then perform step 5.
7. When finished entering the MMSI number, press the [FINISH] soft key.
Page 86
NOTE
GX6500E/GX6000E