Standard Horizon QUANTUM GX6500E Owner's Manual page 101

6. Press the [YES] soft key to transmit the DSC test call
to the other vessel.
7. Press the [QUIT] soft key to return to radio operation.
DSC Test Call by Manually Entering an MMSI
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "DSC CALL", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "DSC TEST CALL",
then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "MANUAL", then
press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select the first digit in
the MMSI, then press the [SELECT] soft key.
6. Repeat step 5 until all the numbers of the MMSI are
shown on the display.
7. Press the [FINISH] soft key to show the test call page.
8. Press the [YES] soft key to transmit the DSC test call
to the other vessel.
9. Press the [QUIT] soft key to return to radio operation.
GX6500E/GX6000E Page 101