Standard Horizon QUANTUM GX6500E Owner's Manual page 116

6. Rotate the DIAL/ENT knob to select "NAME:", then
press the [SELECT] soft key.
7. Enter the route name by rotating the DIAL/ENT knob
and the [SELECT] soft key.
When finished entering the name (using fifteen char-
acters or less), press the [FINISH] soft key.
8. Rotate the DIAL/ENT knob to select "ROUTE POINTS",
press the [SELECT] soft key.
9. Rotate the DIAL/ENT knob to select "WPT:", then
press the [SELECT] soft key.
10. Rotate the DIAL/ENT knob to select a waypoint, then
press the [SELECT] soft key.
11. Rotate the DIAL/ENT knob to select "Via1", then
press the [SELECT] soft key.
12. Rotate the DIAL/ENT knob to select a waypoint, then
press the [SELECT] soft key.
13. Repeat steps 11 and 12 to add more via-points.
14. Press the [BACK] soft key.
15. Rotate the DIAL/ENT knob to select "SAVE", then
press the [SELECT] soft key to store the route into
memory.
16. Press the CLEAR key to return to radio operation.
Editing a Route
This function allows a previously entered route to be edited.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "WAYPOINT
SETUP", then press the [SELECT] soft key.
Page 116
c
GX6500E/GX6000E
c