Backup Configuration
Buttons
: Click to save configuration.
4.1.2.1 Saving Configuration
In the Industrial Managed Switch, the running configuration file stores in the RAM. In the current version, the running
configuration sequence of running-config can be saved from the RAM to FLASH by "Save Configurations to FLASH" function,
so that the running configuration sequence becomes the startup configuration file, which is called configuration save.
To save all applied changes and set the current configuration as a startup configuration. The startup-configuration file will be
loaded automatically across a system reboot.
1.
Click "Save > Save Configurations to FLASH" to login to the "Configuration Manager" page.
2.
Select "Source File = Running Configuration" and "Destination File = Startup Configuration".
3.
Press the "Apply" button to save running configuration to start up configuration.
configuration file to be startup-config.
The backup configuration is empty in FLASH; please save the backup
configuration first by "Maintenance > Backup Manager".
39
User's Manual of IGS-801M