Radius Server - Planet Networking & Communication igs-801m User Manual

4.9.2 RADIUS Server

This page is to configure the RADIUS server connection session parameters. The RADIUS Settings screens in
Figure 4-9-11 & Figure 4-9-12
The page includes the following fields:
Object
 Retries
 Timeout for Reply
 Dead Time
 Key String
Buttons
: Click to apply changes.
appears.
Figure 4-9-10 Use Default Parameters Page Screenshot
Description
Timeout is the number of seconds, in the range 1 to 10, to wait for a reply from a
RADIUS server before retransmitting the request.
Retransmit is the number of times, in the range 1 to 30, a RADIUS request is
retransmitted to a server that is not responding. If the server has not responded
after the last retransmit it is considered to be dead.
The Dead Time, which can be set to a number between 0 and 3600 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
The secret key - up to 63 characters long - shared between the RADIUS server
and the switch.
207
User's Manual of IGS-801M
Figure 4-9-10,