Vlan Setting Example; Two Separate 802.1Q Vlans - Planet Networking & Communication igs-801m User Manual

4.5.14 VLAN setting example:

- Separate VLANs
- 802.1Q VLAN Trunk

4.5.14.1 Two separate 802.1Q VLANs

The diagram shows how the Industrial Managed Switch handles Tagged and Untagged traffic flow for two VLANs. VLAN Group
2 and VLAN Group 3 are separated VLANs. Each VLAN isolates network traffic so only members of the VLAN receive traffic
from the same VLAN members. The screen in
Industrial Managed Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follows:
Untagged packet entering VLAN 2

While [PC-1] transmits an untagged packet enters Port-1, the Industrial Managed Switch will tag it with a VLAN
1.
Tag=2. [PC-2] and [PC-3] will received the packet through Port-2 and Port-3.
[PC-4], [PC-5] and [PC-6] received no packet.
2.
Figure 4-5-20 appears and
Figure 4-5-20 Two Separate VLAN Diagrams
VID Untagged Members
1 Port-7~Port-8
2 Port-1,Port-2
3 Port-4,Port-5
Table 4-5-2 VLAN and Port Configuration
120
User's Manual of IGS-801M
Table 4-5-2 describes the port configuration of the
Tagged Members
N/A
Port-3
Port-6