Igmp Static Group - Planet Networking & Communication igs-801m User Manual

The page includes the following fields:
Object

VLAN ID
 Querier State
 Querier Status
 Querier Version
 Querier IP

4.7.2.3 IGMP Static Group

Multicast filtering can be dynamically configured using IGMP Snooping and IGMP Query messages as described in above
sections. For certain applications that require tighter control, you may need to statically configure a multicast service on the
Industrial Managed Switch. First add all the ports attached to participating hosts to a common VLAN, and then assign the
multicast service to that VLAN group.
- Static multicast addresses are never aged out.
- When a multicast address is assigned to an interface in a specific VLAN, the corresponding traffic can only be
forwarded to ports within that VLAN.
The IGMP Static Group configuration screens in
The page includes the following fields:
Object
 VLAN ID
 Group IP Address
 Member Ports
Buttons
Description
Display the current VLAN ID
Display the current querier state
Display the current querier status
Display the current querier version
Display the current querier IP
Figure 4-7-12
Figure 4-7-12 Add IGMP Static Group Page Screenshot
Description
Select VLAN ID from this drop-down list
The IP address for a specific multicast service
Select port number from this drop-down list
155
& Figure 4-7-13 appear.
User's Manual of IGS-801M