4.8.4 Rate Limit
Configure the switch port rate limit for the switch port on this page.
4.8.4.1 Ingress Bandwidth Control
This page provides to select the ingress bandwidth preamble. The Ingress Bandwidth Control Setting and Status screens in
Figure 4-8-16
&
Figure 4-8-17
The page includes the following fields:
Object
Port
State
Rate (Kbps)
Buttons
: Click to apply changes.
appear.
Figure 4-8-16 Ingress Bandwidth Control Settings Page Screenshot
Description
Select port number from this drop-down list
Enable or disable the port rate policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
Figure 4-8-17 Ingress Bandwidth Control Status Page Screenshot
188
User's Manual of IGS-801M