Multicast Profile Setting - Planet Networking & Communication igs-801m User Manual

4.7.7.1 Multicast Profile Setting

The Add Profile and Profile Status screens in
The page includes the following fields:
Object

IP Type
 Profile Index
 Group from
 Group to
 Action
Buttons
: Click to add multicast profile entry.
Figure 4-7-36 &
Figure 4-7-36 Add Profile Setting Page Screenshot
Description
Select IPv4 or IPv6 from this drop-down list
Indicates the ID of this particular profile
Specifies multicast groups to include in the profile. Specify a multicast group
range by entering a start IP address.
Specifies multicast groups to include in the profile. Specify a multicast group
range by entering an end IP address.
Sets the access mode of the profile; either permit or deny.
- Permit Multicast join reports are processed when a multicast group falls
within the controlled range.
- Deny When the access mode is set to, multicast join reports are only
processed when the multicast group is not in the controlled
range.
Figure 4-7-37 IGMP/MLD Profile Status Page Screenshot
173
Figure 4-7-37 appear.
User's Manual of IGS-801M