User's Manual of IGS-801M
2.2 Mounting Installation
This section describes how to install your Industrial Managed Switch and make connections to the Industrial Managed Switch.
Please read the following topics and perform the procedures in the order being presented. To install your Industrial Managed
Switch on a desktop or shelf, simply complete the following steps.
2.2.1 DIN-rail Mounting
The DIN-rail is screwed on the
Industrial Managed Switch
when out of factory. When you need to replace the wall mount
application with DIN-rail application on Industrial Managed Switch, please refer to the following figures to screw the DIN-rail on
the
Industrial Managed
Switch. To hang the
Industrial Managed
Switch, follow the steps below:
Step 1: Screw the DIN-rail on the Industrial Managed Switch.
Step 2: Place the bottom of DIN-rail lightly into the track.
24