Printer Features - Oki ES9455 MFP Printing Manual

3.PRINTING FROM Macintosh

Printer Features

In the Printer Features menu, you can set special printing features.
Finishing
In the Finishing menu, you can set the destination, hole punching and stapling.
1
2
3
4
1) Destination
This selects the destination stacker.
- Printer's Default — Select this to set the output to the default tray (that is set as such for raw jobs in the Printer
setting page of TopAccess Administrator's page).
- Stacker — Select this to set the output to the stacker of this equipment.
- Upper Stacker — Select this to set the output to the upper stacker of this equipment.
- Side Stacker — Select this to set the output to the side stacker of this equipment.
- Stacker (Upper) — Select this to route the stacker (upper) of the Job Separator.
- Finisher — Select this to set the output to the upper stacker of the Finisher.
- Finisher 2 — Select this to set the output to the stacker of the Finisher.
Destinations selectable differ depending on the model and the option configuration.
Depending on the type of Finisher installed and destination settings, stapling and hole punching may not be
performed.
Depending on the equipment settings, the paper may be delivered to a tray that cannot carry out stapling or
hole punching when [Printer's Default] is selected as the [Destination] option.
[Finisher] and [Finisher 2] can be selected when the Finisher or Saddle Stitch Finisher are installed.
[Side Stacker] can be selected only when neither of the Finisher and the Saddle Stitch Finisher is installed.
Printing From Application on Mac OS X 10.4.x to Mac OS X 10.8.x
3 PRINTING FROM Macintosh
147