Oki ES9455 MFP Printing Manual page 79

2.PRINTING FROM WINDOWS
2) Option
This option sets whether the following optional devices are installed.
Trays
This sets the installation of drawers according to the configuration.
- Tray1 — Select this when only Tray 1 is installed.
- Tray 1 & Tray 2 — Select this when Trays 1 and 2 are installed.
- Tray 1, 2 & Tray 3 — Select this when Trays 1, 2 and 3 are installed.
- Tray 1, 2 & Tray 3, 4 — Select this when Trays 1, 2, 3 and 4 are installed.
- Tray 1, 2 & LCF — Select this when Trays 1, 2 and the Large Capacity Feeder are
installed.
3) Finisher
This sets whether or not the Finisher is installed.
- None — Select this when a Finisher is not installed.
- Finisher — Select this when a Finisher is installed.
- Saddle Stitch Finisher — Select this when a Saddle Stitch Finisher is installed.
- Job Separator — Select this when a Job Separator is installed.
4) Hole Punch Unit
This sets whether or not the Hole Punch Unit is installed.
- None — Select this when a Hole Punch Unit is not installed.
- 2 Holes — Select this when a 2 Hole Punch Unit is installed.
- 2/3 Holes — Select this when a 2/3 Hole Punch Unit is installed.
- 4 Holes (F) — Select this when a 4 hole (F) punch unit is installed.
- 4 Holes (S) — Select this when a 4 hole (S) punch unit is installed.
5) [Tray Settings]
Click this to set the paper size and paper type of each tray. The [Tray Settings] dialog box appears by clicking this.
P.79 "Tray Settings"
6) [Account Settings]
Click this button to set whether the user management setting is enabled or not. You can also set whether the Private
Print Restriction function and Hold Print Restriction function are enabled or not. The [Account Settings] dialog box
appears upon clicking this button.
P.80 "Account Settings"
2 PRINTING FROM WINDOWS
Setting Up Print Options 77