Oki ES9455 MFP Printing Manual page 36

2 PRINTING FROM WINDOWS
2) Print Paper Size
Select this to enlarge or reduce a page image to fit exactly in the selected paper size. If you do not wish to enable
enlarge or reduce printing, select [Same as Original Size].
Also when you want to enable Tab printing, select [Letter Tab] or [A4 Tab] here. When you select [Letter Tab] or [A4
Tab], the [Primary Tab Dialog] dialog box appears.
P.37 "Primary Tab Dialog"
There are also 20 custom paper sizes in the [Print Paper Size] box. You can set the custom paper sizes in the
[Others] tab.
P.69 "[Others] tab"
3) Image Scale
Select this check box to enter the scale manually to enlarge or reduce an image. The ratio can be set at between 25
and 400%.
For detailed instructions on how to print with the [Image Scale] setting, see the following page:
P.99 "Fitting images within paper size"
4) Paper Source
This selects a paper source to print a job in the most suitable paper size. The figure on the right indicates the paper
size set for each paper source. When you select a paper source, the chosen one is indicated with a green square in
the figure.
You can select a paper source by directly clicking on the figure on the right.
- Auto — Automatically selects the paper set in this equipment according to the printed document size.
- Tray 1 — Paper is fed from the 1st Tray.
- Tray 2 — Paper is fed from the 2nd Tray.
- Tray 3 — Paper is fed from the 3rd Tray.
- Tray 4 — Paper is fed from the 4th Tray.
- LCF — Paper is fed from the Large Capacity Feeder. This cannot be selected if the Large Capacity Feeder is not
installed.
- MPT — Paper is fed from the MPT. When this is selected and print a job, [JOB STATUS] on the touch panel will
blink. Press [JOB STATUS] and check the paper size of the job. Then set the paper and press the [START] button
to print a job.
When you select the MPT as a paper source but the orientations of the original and the paper on the MPT differ,
the data in the original are rotated for 90 degrees and printed in the same orientation as that of the original, as
long as their paper sizes are the same (this is available only for A4, B5, LT and 16K). For example, when an
original is A4 in a portrait direction but the paper on the MPT is A4-R, the data of the original are printed in A4 in
a portrait direction.
The selectable values vary depending on the optional devices installed in this equipment and their configuration
on the [Device Settings] tab.
When paper such as special or tab paper that needs to be fed from the MPT is set, [MPT] may be automatically
selected in the [Paper Source] box, and then a confirmation dialog box may appear.
When the paper size settings on the [Device Settings] tab differ from those in the equipment, the paper source
setting is ignored and the equipment may prompt to set the paper in the MPT.
34 Setting Up Print Options