Printer Features - Oki mc760x User Manual

- Hold — Select this option to print a hold job. The print
job, sent as a hold job, is saved in the hold job queue on
this equipment. To perform printing, select the desired
job on the touch panel display and press [PRINT]. This
option is useful to prevent you from forgetting to remove
printed sheets.
3) Distinguish Thin Lines
Select this check box to print thin lines clearly.
4) Do not Print Blank Pages
Select whether you require blank pages to be printed.
Note
• When more than 2 is selected at the [Page per Sheet]
option in the Layout menu, the blank pages will be
printed.
• Pages with a header or footer will be printed even if the
content is blank.
 Printer Features
In the Printer Features menu, you can set special printing
features.
Finishing
In the Finishing menu, you can set the destination and stapling.
1
2
1) Destination
This selects the destination tray.
- Printer's Default — Select this to set the output to the
default tray (that is set as such for raw jobs in the
Machine setting page of TopAccess Administrator's
page).
- Face down/up stacker — Select this to set the output
to the face down/up stacker of this equipment.
- Tray 1 — Select this to set the output to the tray of the
Finisher.
Note
• Destinations selectable differ depending on the option
configuration.
• Depending on the equipment settings, the paper may be
delivered to a tray that cannot carry out stapling when
[Printer's Default] is selected as the [Destination] option.
2) Stapling
This sets whether a print job is stapled.
- Off — Select this to print without stapling.
- Upper Left (Portrait) / Upper Right (Landscape) —
Select this to staple on the upper left for a portrait
document, or on the upper right for a landscape
document.
Note
• This option cannot be selected if a Finisher is not
installed.
Booklet
In the Booklet menu, you can set booklet printing.
1
2
3
4
1) Booklet Paper Size
Select a paper size for the booklet. Both sides of a sheet
are printed as two pages. The booklet size will be half the
size of the paper size that you specify.
2) Left to Right Page Layout
Select this check box to create a booklet that can be read
from left to right.
3) Booklet Center Margin
Select the width of the margin added to the center.
- 64 -
PRINTING FROM Macintosh
1
2
3
4
5
6
7