Checking Supplies; Viewing The Tray Status; Checking Remaining Toner Levels - Oki ES9455 MFP Printing Manual

Checking Supplies

Viewing the tray status

When the equipment is idle, pressing [JOB STATUS] > [SUPPLY] displays the [SUPPLY] tab. From this tab, you can view
the paper size setting selected for each tray. If you press [SUPPLY] when printing is in progress, the tray from which paper
is being fed is highlighted.
If you try to print a document from a client computer and specify a paper size while none of the tray or MPT on the
equipment has the specified size of paper, a printing error occurs, and [JOB STATUS] blinks. In this case, pressing [JOB
STATUS] displays the [SUPPLY] tab, from which you can learn which tray needs additional sheets of paper. For further
instructions on how to clear a printing error, refer to the Troubleshooting Guide.

Checking remaining toner levels

Pressing [JOB STATUS] > [TONER] displays the [TONER] tab from which you can check the approximate amount of
toner remaining in the toner cartridges.
If any of the toner cartridges is running out, be sure to get a new cartridge ready. For more information about replacing
toner cartridges, refer to the Quick Start Guide or the Troubleshooting Guide.
4 MANAGING PRINT JOBS FROM THE CONTROL PANEL

Checking Supplies

187