Switching Equipment To Print Jobs - Oki ES9455 MFP Printing Manual

2 PRINTING FROM WINDOWS

Switching equipment to print jobs

When more than one piece of OKI MFP series equipment exists over a network, you can switch it to another one on the
printer driver menu.
If the equipment that you intended to use is busy with a large number of print jobs, for example, you can send your job to
another piece of OKI MFP series equipment that is currently holding no print jobs and have it printed.

Switching equipment to print jobs

1
Display the [Others] tab menu.
2
Click [Output Devices].
The [Output Devices] dialog box appears.
3
Select [Print Job to Selected Devices].
4
Select the desired equipment in the [Selected Devices] boxes.
You can select more than one piece of equipment in the [Selected Devices] boxes. In this case, the same
number of copies is printed from all of the pieces of equipment you selected.
When you select the equipment in the [Selected Devices] boxes, make sure to select that which supports
features enabling all the print options of the job.
- Select equipment which enables stapling if the job needs that.
- Select equipment which enables hole punching if the job needs hole.
- Select equipment with the External Large Capacity Feeder installed if the job needs it.
- Select color equipment if the job needs full- or twin-color printing.
If you select the [Always Use This Setting] check box, you can omit the setting of the [Output Devices]
dialog box from the next time.
Equipment selected in the [Selected Devices] boxes must be registered in [Printer Folder]. If you want to
use equipment not registered in [Printer Folder], add it in [Add Printer] on the [Others] tab of printer driver.
P.73 "Add Printer"
5
Click [OK] to close the [Output Devices] dialog box.
6
Set any other print options you require and click [OK].
122 Printing With Best Functions for Your Needs