Oki ES9455 MFP Printing Manual page 59

2.PRINTING FROM WINDOWS
Name
Enter the Image Quality type name to be created. This must be entered when [Save Current Settings as] is selected.
When you edit an existing custom Image Quality Type, the settings of this Image Quality Type will be
overwritten regardless of whether or not this Image Quality Type is renamed.
Even if you enter any of the default Image Quality Type names ([General], [Photograph], [Presentation], [Line
Art] or [Advanced]) registered as default settings, these default Image Quality types will not be overwritten. The
Image Quality Type is saved as a new custom Image Quality Type under the name you have specified.
Original Image Quality Type
Select the image quality type to be applied as the based image quality.
2) Halftone
This sets how halftones are printed.
- Auto — Select this to print using proper halftone depending on the contents in the document automatically.
- Smooth — Select this to print halftone smoothly.
- Detail — Select this to print halftone in detail.
3) Resolution
This sets the resolution for printing.
- 600 dpi — Select this to print in 600 x 600 dpi.
- 1200 dpi *1 — Select this to print in 1200 x 1200 dpi.
- 600 x 1200 dpi
*1 Images are reproduced more smoothly because jaggies on the outlines of small text or fine lines such as graphics are suppressed.
However, 600 dpi is recommended for photos because the tone reproduction level of the image is higher.
Note that if the resolution is 1200 dpi, it takes longer than 600 dpi to print out because the capacity of the data being handled is larger.
When [Photograph] or [Presentation] is selected in [Image Quality Type] of the [Image Quality] tab, [1200 dpi]
and [600 x 1200 dpi] cannot be displayed.
When [600 x 1200 dpi] is selected, the functions below are not available.
- Rotate sort
- Booklet printing
- Automatic change of paper source
- Auto Trapping
When [600 x 1200 dpi] is selected, after print data are set according to the tray and paper direction in the
equipment, they cannot be rotated automatically even though the direction of the paper placed in the tray is
changed. In hold printing with A4-R paper placed in the first tray, for example, after the job is stored in the Hold
Print queue, if you rotate the paper by 90 degrees and perform printing, the print data are not changed resulting
in printing with A4-R.
4) Use Black for All Text
Select this check box to print all text in 100% black except white texts.
This function is available only for the printer drivers below.
- PCL Printer
- XPS
5) Distinguish Thin Lines
Select this check box to print thin lines clearly.
6) Pure Black
Select this check box to print the black contents using black toner. When this box is selected, please select how this
function applies in the [Apply to] box.
*1
— Select this to print in 600 x 1200 dpi.
2 PRINTING FROM WINDOWS
Setting Up Print Options 57