Oki ES9455 MFP Printing Manual page 14

2 PRINTING FROM WINDOWS
3
Display the [Device Settings] tab menu, and set the following options.
Model Selection — This sets the model type. The setup items of the printer driver are changed according to the
model selected.
If you select [Universal], you can narrow down the setup items of the printer driver to those used commonly in
all of the OKI MFP series. It is convenient in such cases as when you are using a printer driver already installed
to other OKI MFP Series models.
Option — This option sets whether the following optional devices are installed.
Trays — This sets whether or not the Paper Feed Unit (2nd tray), Paper Feed Pedestal (3rd tray), Additional
Drawer Module (4th tray) or Large Capacity Feeder is installed.
Finisher — This sets whether or not the Finisher, Saddle Stitch Finisher, Inner Finisher or Job Separator
is installed.
Hole Punch Unit — This sets whether or not the Hole Punch Unit is installed.
Setup items differ depending on the model and the option configuration.
For more information about each item, see the descriptions about the [Device Settings] tab.
P.76 "[Device Settings] tab"
4
Click [Tray Settings].
The [Tray Settings] dialog box appears.
12 Before Using the Printer Driver