Oki ES9455 MFP Printing Manual page 61

2.PRINTING FROM WINDOWS
Setting: [Color Balance] tab
In the [Color Balance] tab of the [Setting] dialog box, you can specify the following functions. Adjust the density level by
moving the scroll bar, or pressing buttons on the right and left of the scroll bar.
This option is available only when you have a multifunctional digital color system (color MFP). The setup items differ
depending on the model. For setup items other than those below, refer to the corresponding Printing Guide.
1
2
3
4
1) All Colors
Adjust the density of all the colors.
2) Each Color
Adjusts the density of each color for printing. You can set from -4 to 4.
3) Detail
Select this check box to adjust the density of each color separately in details. When this box is selected, click [Edit] to
display the [Color Balance Detail] dialog box and specify the density of each color.
— Color Balance Detail
In the [Color Balance Detail] dialog box, you can specify the density of low, middle, and high colors for each color.
- Low — Change this density to adjust the density of light color.
- Middle — Change this density to adjust the density of half color.
- High — Change this density to adjust the density of deep color.
- Restore Defaults — Click this to restore all the image quality setting details displayed in the [Color Balance Detail]
dialog box to the original factory defaults.
4) [Restore Defaults]
Click this to restore all the image quality setting details displayed in the [Color Balance] tab menu to the original factory
defaults.
2 PRINTING FROM WINDOWS
Setting Up Print Options 59