Oki ES9455 MFP Printing Manual page 45

2.PRINTING FROM WINDOWS
5) Hole Punch
This sets whether a print job is printed with hole punches.
- Center Top — Select this to create holes along the top edge and print.
- Middle Left — Select this to create holes along the left side and print.
Hole punching can be selected only when a Hole Punch Unit is installed.
The "Hole Punch" option is not available when the Magazine sort function is selected.
The selectable options vary depending on the paper size.
For the detailed instructions on how to print with the [Hole Punch] setting, see the following page:
P.107 "Hole punching"
6) Folding
Select this check box if you want to have the printed paper folded when it exits. If this option is selected, the job is
printed according to the other print options set, and then exits with its center folded.
The Folding option is used when the Booklet option is selected in advance. If you apply the Booklet option in a
normal page order, select [Booklet] in the [2-Sided Printing] box.
If you apply the Folding option, set [Booklet] in the [2-Sided Printing] box, click [Details], open the [Booklet Details]
dialog box and then select the [Folding] check box.
The "Folding" option is available only when the Saddle Stitch Finisher is installed in any of the following:
- ES9475 MFP Series
For detailed instructions on how to print with the Folding option, see the following page:
P.103 "Making a booklet"
2 PRINTING FROM WINDOWS
Setting Up Print Options 43