Table of Contents
Advertisement
2.8.5 Verify or Create Node DCC Terminations
For a fixed-rate card, click the Provisioning > SDH Thresholds tabs. For the ASAP card, click the
Step 2
Provisioning > Optical >Optics Thresholds tabs.
Step 3
From the Types list, choose Physical and click Refresh.
For the port you want to provision, click the Set button in the Set OPR column. In the confirmation
Step 4
dialog box, click OK.
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
2-140
Chapter 2 Alarm Troubleshooting
July 2010
Advertisement
Table of Contents
Troubleshooting
