Table of Contents
Advertisement
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
VMG Access and Login
•
Internet Access
•
Wireless Internet Access
•
USB Device Connection
•
UPnP
41.1 Power, Hardware Connections, and LEDs
The VMG does not turn on. None of the LEDs turn on.
Make sure the VMG is turned on.
1
Make sure you are using the power adaptor or cord included with the VMG.
2
Make sure the power adaptor or cord is connected to the VMG and plugged in to an appropriate
3
power source. Make sure the power source is turned on.
Turn the VMG off and on.
4
If the problem continues, contact the vendor.
5
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
Turn the VMG off and on.
4
C
HAPTER
VMG5313-BXB Series User's Guide
293
Troubleshooting
Section 1.5 on page
4 1
19.
Advertisement
Table of Contents
