Modify 802.1X Settings; Technical Reference - ZyXEL Communications VMG5313-BXB SERIES User Manual

6.6.1 Modify 802.1X Settings

Use this screen to edit 802.1X authentication settings. Click the Edit icon next to the rule you want
to edit. The screen shown next appears.
Figure 28 Network Setting > Broadband > 802.1x > Modify
The following table describes the labels in this screen.
Table 16 Network Setting > Broadband > 802.1x: Edit
LABEL
Active
Interface
EAP Identity
EAP method
Bidirectional
Authentication
Certificate
Trusted CA
OK
Cancel

6.7 Technical Reference

The following section contains additional technical information about the VMG features described in
this chapter.
Encapsulation
Be sure to use the encapsulation method required by your ISP. The VMG can work in bridge mode
or routing mode. When the VMG is in routing mode, it supports the following methods.
Chapter 6 Broadband
DESCRIPTION
This field allows you to activate/deactivate the authentication.
Select this to enable the authentication. Clear this to disable this authentication without
having to delete the entry.
Select an interface to which the authentication applies.
Enter the EAP identity of the authentication.
This is the EAP method used for this authentication.
Select Enable to allow bidirectional authentication.
Select the certificate you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Local Certificates screen.
Select the Trusted CA you want to assign to the authentication. You need to import the
certificate in the Security > Certificates > Trusted CA screen.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
VMG5313-BXB Series User's Guide
84