ZyXEL Communications VMG5313-BXB SERIES User Manual page 278

Figure 165 Email Notification > Add
The following table describes the labels in this screen.
Table 136 Email Notification > Add
LABEL DESCRIPTION
Mail Server Enter the server name or the IP address of the mail server for the e-mail address specified
Address in the Account Email Address field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Authentication Enter the user name (up to 32 characters). This is usually the user name of a mail account
Username you specified in the Account Email Address field.
Authentication Enter the password associated with the user name above.
Password
Account Email Enter the e-mail address that you want to be in the from/sender line of the e-mail
Address notification that the VMG sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be authenticated
by the mail server as well.
OK Click this button to save your changes and return to the previous screen.
Cancel Click this button to begin configuring this screen afresh.
Chapter 36 E-mail Notification
VMG5313-BXB Series User's Guide
278