To activate WPS:
Make sure the PWR/SYS LED is on and not blinking.
1
Press the WPS On/Off button for two seconds and release it.
2
Press the WPS button on another WPS-enabled device within range of the VMG. The WLAN/WPS
3
LED flashes orange while the VMG sets up a WPS connection with the other wireless device.
Once the connection is successfully made, the WLAN/WPS LED shines green.
4
To turn off the wireless network, press the Wi-Fi On/Off button for one to five seconds. The
WLAN/WPS LED turns off when the wireless network is off.
Chapter 1 Introducing the VMG
VMG5313-BXB Series User's Guide
22