ZyXEL Communications VMG5313-BXB SERIES User Manual page 259

Table 122 System Monitor > Routing Table (continued)
LABEL DESCRIPTION
Flag This indicates the route status.
U-Up: The route is up.
!-Reject: The route is blocked and will force a route lookup to fail.
G-Gateway: The route uses a gateway to forward traffic.
H-Host: The target of the route is a host.
R-Reinstate: The route is reinstated for dynamic routing.
D-Dynamic (redirect): The route is dynamically installed by a routing daemon or redirect.
M-Modified (redirect): The route is modified from a routing daemon or redirect.
Metric The metric represents the "cost of transmission". A router determines the best route for
transmission by choosing a path with the lowest "cost". The smaller the number, the lower
the "cost".
Service This indicates the name of the service used to forward the route.
Interface This indicates the name of the interface through which the route is forwarded.
brx indicates a LAN interface where x can be 0~3 to represent LAN1 to LAN4 respectively.
ptm0 indicates a WAN interface using IPoE or in bridge mode.
ppp0 indicates a WAN interface using PPPoE.
Chapter 27 Routing Table
VMG5313-BXB Series User's Guide
259