Add/Edit Policy Route - ZyXEL Communications VMG5313-BXB SERIES User Manual

Table 43 Network Setting > Routing >Policy Route (continued)
LABEL
Status
Name
Source IP
Source Subnet
Mask
Protocol
Source Port
Source MAC
Source
Interface
WAN Interface
Modify

9.4.1 Add/Edit Policy Route

Click Add New Policy Route in the Policy Route screen or click the Edit icon next to a policy. Use
this screen to configure the required information for a policy route.
Figure 66 Policy Route: Add/Edit
The following table describes the labels in this screen.
Table 44 Policy Route: Add/Edit (Sheet 1 of 2)
LABEL
Active
Route Name
Source IP
Source Subnet
Mask
Protocol
Chapter 9 Routing
DESCRIPTION
This field displays whether the DNS route is active or not. A yellow bulb signifies that this
DNS route is active. A gray bulb signifies that this DNS route is not active.
This is the name of the rule.
This is the source IP address.
his is the source subnet mask address.
This is the transport layer protocol.
This is the source port number.
This is the source MAC address.
This is the interface from which the matched traffic is sent.
This is the WAN interface through which the traffic is routed.
Click the Edit icon to edit this policy.
Click the Delete icon to remove a policy from the VMG. A window displays asking you to
confirm that you want to delete the policy.
DESCRIPTION
Select this to activate this policy route.
Enter a descriptive name of up to 8 printable English keyboard characters, not including
spaces.
Enter the source IP address.
Enter the source subnet mask address.
Select the transport layer protocol (TCP or UDP).
VMG5313-BXB Series User's Guide
140