Usb Device Connection; Upnp - ZyXEL Communications VMG5313-BXB SERIES User Manual

• Building Materials: metal doors, aluminum studs.
• Electrical devices: microwaves, monitors, electric motors, cordless phones, and other wireless
devices.
To optimize the speed and quality of your wireless connection, you can:
• Move your wireless device closer to the AP if the signal strength is low.
• Reduce wireless interference that may be caused by other wireless networks or surrounding
wireless electronics such as cordless phones.
• Place the AP where there are minimum obstacles (such as walls and ceilings) between the AP and
the wireless client.
• Reduce the number of wireless clients connecting to the same AP simultaneously, or add
additional APs if necessary.
• Try closing some programs that use the Internet, especially peer-to-peer applications. If the
wireless client is sending or receiving a lot of information, it may have too many programs open
that use the Internet.
What is a Server Set ID (SSID)?
An SSID is a name that uniquely identifies a wireless network. The AP and all the clients within a
wireless network must use the same SSID.

41.5 USB Device Connection

The VMG fails to detect my USB device.
Disconnect the USB device.
1
Reboot the VMG.
2
If you are connecting a USB hard drive that comes with an external power supply, make sure it is
3
connected to an appropriate power source that is on.
Re-connect your USB device to the VMG.
4

41.6 UPnP

When using UPnP and the VMG reboots, my computer cannot detect UPnP and refresh My
Network Places > Local Network.
Chapter 41 Troubleshooting
VMG5313-BXB Series User's Guide
298