Table of Contents
Advertisement
Headlight Switch (Vehicles Sold In Canada)
1 — Rotate Headlight Switch
2 — Dimmer Control
3 — Push Bed Light
4 — Push Front Fog Light
NOTE:
Vehicles sold in Canada are equipped with a headlight
switch with an AUTO and ON detent but without an OFF
detent. Headlights will be deactivated when the head-
light switch is placed in the parking lights position. How-
ever, the Daytime Running Lights (DRLs) will be acti-
vated along with the front and rear marker lights. The
DRLs may be deactivated when the parking brake is
engaged.
Rotate the headlight switch clockwise to the first detent
for parking lights and instrument panel light operation.
Rotate the headlight switch to the second detent for
headlights, parking lights, and instrument panel light
operation.
NOTE:
For vehicles sold in Canada, rotate the headlight switch
clockwise from the parking lights and instrument panel
light position to the first detent to turn on headlights,
parking lights, and instrument panel light. Rotate the
headlight switch to the second detent for the AUTO
position.
DAYTIME RUNNING LIGHTS (DRLS)
— IF EQUIPPED
The Daytime Running Lights (DRLs) are in a dedicated
position below the headlight assembly. DRLs are active
when the low beams are not on while the vehicle's
transmission is in any position (automatic transmis-
sion), or when the vehicle begins to move (manual
transmission).
NOTE:
•
For vehicles sold in Canada, the DRLs will automati-
cally deactivate when the front fog lights are turned
on.
•
On some vehicles, the Daytime Running Lights may
deactivate, or reduce intensity, on one side of the
vehicle (when a turn signal is activated on that
side), or on both sides of the vehicle (when the haz-
ard warning lights are activated).
HIGH/LOW BEAM SWITCH
The High/Low Beam switch is located within the multi-
function lever on the left side of the steering wheel.
High beam headlights can be used for improved visibil-
ity in low lit areas when there is no oncoming traffic.
Otherwise, it is recommended to use the low beam
headlights to reduce glare to other vehicles.
GETTING TO KNOW YOUR VEHICLE
With the headlight switch activated, push the multifunc-
tion lever toward the instrument panel to switch the
headlights to high beams. The lever will return to the
centered position. To return the headlights to low beam,
pull the lever toward the steering wheel, or push the
lever toward the instrument panel.
Multifunction Lever
AUTOMATIC HIGH BEAM
HEADLAMP CONTROL —
IF EQUIPPED
The Automatic High Beam Headlamp Control system
provides increased forward lighting at night by auto-
matically controlling the high beams through the use of
a camera mounted on the vehicle's header. This cam-
era detects vehicle specific light and automatically
switches from high beams to low beams until the
approaching vehicle is out of view.
NOTE:
•
The Automatic High Beam Headlamp Control can be
turned on or off by selecting "ON" under "Auto Dim
High Beams" within your Uconnect Settings
page 166, as well as turning the headlight
switch to the AUTO position and placing the multi-
function lever in the high beam position.
49
2
Advertisement
Table of Contents
