In Case Of Emergency; Hazard Warning Flashers; Sos - Emergency Call - If Equipped - Jeep Wrangler Owner's Manual

HAZARD WARNING FLASHERS

The Hazard Warning Flashers button is located on the
instrument panel below the climate controls.
Hazard Warning Flashers Button
Push the button to turn on the Hazard Warning Flashers.
When the button is activated, all directional turn signals
will flash on and off to warn oncoming traffic of an
emergency. Push the button a second time to turn off the
Hazard Warning Flashers.

IN CASE OF EMERGENCY

This is an emergency warning system and it should not be
used when the vehicle is in motion. Use it only when your
vehicle is disabled or signaling a safety hazard warning for
other motorists.
When you must leave the vehicle to seek assistance, the
Hazard Warning Flashers will continue to operate even
though the ignition is placed in the OFF position.
NOTE:
With extended use the Hazard Warning Flashers may wear
down your battery.
SOS - EMERGENCY CALL — IF EQUIPPED
Your vehicle has an on-board assistance feature that is
designed to provide support in case of accident and/or
emergency. This feature is automatically activated by air
bag intervention, or can be activated manually by pushing
the button located on the overhead console.
NOTE:
SOS-Emergency Call will only work with an enabled
network operator.
SOS-Emergency Call Button
The SOS-Emergency Call system automatically forwards a
call to emergency services in the event of an accident with
air bag intervention providing that the ignition device is in
the RUN position and the air bags are working. Pressing
the SOS button on the overhead console will illuminate the
light within the button. When the connection between the
vehicle and a public safety operator is made, your vehicle
will automatically transmit location and vehicle
information to the emergency service operator.
Only a public safety operator can remotely end the
SOS-Emergency Call and, if necessary, call the vehicle
205