Installation Procedure - Ricoh B230 Service Manual

G3 Interface Unit (B787)

1.2.2 INSTALLATION PROCEDURE

Before installing this optional unit,
Print out all data in the printer buffer.
Turn off the main switch and disconnect the power cord and the network
cable.
You can add two more G3 boards to this model. Follow the procedures for adding the
single G3 board installation or double G3 boards installation as a customer needs.
1. Remove the rear cover [A] (
2. Cut off the "LINE 2" cover [B] for installing the single G3 board or "LINE 2 and LINE 3"
covers for installing the double G3 boards.
3. Loosen the eight screws (
has already been installed.
B786
x 7).
x 8), and remove the four screws (
8
x 4) if the fax unit
SM