Ricoh B230 Service Manual page 557

3363 [ID Pattern Timing Setting] DFU
001 Scan YCMBk
Paper Transfer Release
002
Start Time
003 Delay Time
004 MUSIC Delay Time
3371 [M/A Calculation] DFU
001 Correction Coefficient: Bk *ENG [0.5 to 2.0 / 1.04 / 0.01 /step]
002 Correction Coefficient: M
003 Correction Coefficient: C
004 Correction Coefficient: Y
[Fixed Supply Mode]
3401
Adjusts the toner supply rate in the fixed toner supply mode.
001 Fixed Rate: Bk
002 Fixed Rate: M
003 Fixed Rate: C
SM
Adjusts the detection timing for the process
*ENG control pattern.
[-500 to 500 / 13.7 / 1 mm/step]
Adjusts the timing when the paper transfer
unit is kept away from the image transfer
*ENG
belt.
[0 to 2500 / 0 / 1 msec/step]
Adjusts the processing timing for the
*ENG process control pattern.
[0 to 2500 / 600 / 1 msec/step]
Adjusts the processing timing for the
pattern that is used for the line position
*ENG
adjustment.
[-2500 to 2500 / 300 / 1 msec/step]
*ENG [0.5 to 2.0 / 0.98 / 0.01 /step]
*ENG [0.5 to 2.0 / 1.11 / 0.01 /step]
*ENG [0.5 to 2.0 / 0.91 / 0.01 /step]
*ENG [0 to 100 / 5 / 1 %/step]
These SPs are used only when SP3-044 is
*ENG
set to "1".
*ENG
5-169 B230/B237/D042