Ricoh B230 Service Manual page 998

Error Codes
Code Meaning
14-09 Authorization Failed for
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buffer Full
14-12 Data Size Too Large
14-13 Send Cancelled
14-14 Security Locked File Error
14-15 Mail Data Error
14-16 Maximum Division Number
Error
14-17 Incorrect Ticket
14-18 Access to MCS File Error
14-30 MCS File Creation Failed
14-31 UFS File Creation Failed
B786
Suggested Cause/Action
Direct SMTP sending not operating correctly.
Software application error.
POP-Before-SMTP or SMTP authorization
failed.
Incorrect setting for file transfer
Number of broadcast addresses exceeded the
limit for the SMTP server.
The send buffer is full so the transmission
could not be completed. Buffer is full due to
using Scan-to-Email while the buffer is being
used send mail at the same time.
Transmission was cancelled because the
detected size of the file was too large.
Processing is interrupted because the user
pressed Stop.
Update the software because of the defective
software.
The transmitting a mail is interrupted via DCS
due to the incorrect data.
Update the software because of the defective
software.
When a mail is divided for the mail
transmission and the division number of a
mail are more than the specified number, the
mail transmission is interrupted.
Update the software because of the defective
software.
Update the software because of the defective
software.
The access to MCS file is denied due to the
no permission of access.
Update the software because of the defective
software.
Failed to create the MCS file because:
The number of files created with other
applications on the Document Server has
exceeded the limit.
HDD is full or not operating correctly.
Software error.
UFS file could not be created:
Not enough space in UFS area to handle both
Scan-to-Email and IFAX transmission.
26 SM