Ricoh B230 Service Manual page 158

- Adjustment Procedure -
1. Copy the C-4 chart in the mode that you want to adjust.
2. Enter the SP mode.
3. Select "Copy SP."
4. Select SP4-918-009.
5. Adjust the offset values until the copy quality conforms to the standard (
table below).
1. Never change "Option" value (default value is 0).
2. Adjust the density in this order: "ID Max," "Middle," "Shadow," "Highlight."
- Photo Mode, Full Color -
Item to Adjust
ID max:
1
(K, C, M, and Y)
Middle (Middle
2 ID)
(K, C, M, and Y)
Shadow (High ID)
3
(K, C, M, and Y)
B230/B237/D042
Level on the C-4 chart
3-8
Rev. 04/2007
Adjustment Standard
Adjust the offset value so that
the density of level 10
matches that of level 10 on
the C-4 chart.
Adjust the offset value so that
the density of level 6 matches
that of level 6 on the C-4
chart.
Adjust the offset value so that
the density of level 8 matches
the
SM