IBM V7000 Introduction And Implementation Manual page 657

2. From the Category pane on the left side of the PuTTY Configuration window, click
Connection  SSH to open the PuTTY SSH Configuration window (Figure A-11).
Figure A-11 SSH protocol version 2
3. In the right pane, in the "Preferred SSH protocol version" section, select 2.
4. From the Category pane on the left side of the PuTTY Configuration window, click
Connection  SSH  Auth. As shown in Figure A-12, in the right pane, in the "Private
key file for authentication:" field under the Authentication Parameters section, either
browse to or type the fully qualified directory path and file name of the SSH client private
key file created earlier (for example, C:\Support Utils\PuTTY\icat.PPK).
Figure A-12 SSH authentication
5. From the Category pane on the left side of the PuTTY Configuration window, click
Session to return to the Session view (Figure A-10 on page 636).
Appendix A. CLI setup and configuration
637