IBM V7000 Introduction And Implementation Manual page 313

If you have either of these two environments, you need to migrate them outside of this
wizard. You can find more information about this topic at the IBM Flex System V7000
Storage Node Information Center at the following website:
http://publib.boulder.ibm.com/infocenter/flexsys/information/index.jsp?topic
=%2Fcom.ibm.acc.4939.doc%2Fsvc_imagemodemigrating_4o29ww.html
The IBM Storwize V7000 Information Center also contains descriptions of this topic:
http://pic.dhe.ibm.com/infocenter/storwize/ic/index.jsp
The VMware ESX Storage vMotion feature might be an alternative to migrating
VMware clusters. For more information about this topic, see the following website:
http://www.vmware.com/products/vmotion/overview.html
– Prerequisites:
• Make sure that the IBM Flex System V7000 Storage Node Fibre Channel ports
have been connected to the SAN fabrics to which the external disk controller and
hosts you want to migrate from are connected.
• If you have VMware ESX hosts in the migration, make sure the VMware ESX hosts
are set to allow volume copies to be recognized.
Click Next to go to the next step.
2. Step 2 of the Storage Migration Wizard is to prepare the environment for migration, and
click Next (Figure 7-11).
Figure 7-11 Storage Migration Wizard step 2 - Prepare the environment for migration
Chapter 7. Storage Migration Wizard
293