IBM V7000 Introduction And Implementation Manual page 557

Example 12-5 Output from SDDDSM - a disk with four paths is displayed
C:\Program Files\IBM\SDDDSM>datapath query device
Total Devices : 1
DEV#:
SERIAL: 60050760008F0006F800000000000039
============================================================================
Path#
0
1
2
3
C:\Program Files\IBM\SDDDSM>
In the previous output, note that the UID of the mapped IBM Flex System V7000 Storage
Node volume reflects the SERIAL number in the output from datapath query device.
8. Open the Windows Disk Management window by clicking Start  Run, typing
diskmgmt.msc or simply open it from the Server Manager. You might have to click More
Actions  Rescan Disks before the FCoE attached disk displays.
Figure 12-37 shows the Windows Disk Management window with the uninitialized IBM
Flex System V7000 Storage Node disk.
Figure 12-37 Disk Management - FCoE attached disk displays
The next steps for getting access to the Windows disk are to initialize. This process is similar
to the WIN 2012 initialize function as described in 12.3.1, "Windows 2012 R2 Fibre Channel
volume attachment" on page 514.
0 DEVICE NAME: Disk1 Part0 TYPE: 2145
Adapter/Hard Disk
Scsi Port3 Bus0/Disk1 Part0
Scsi Port3 Bus0/Disk1 Part0
Scsi Port4 Bus0/Disk1 Part0
Scsi Port4 Bus0/Disk1 Part0
POLICY: OPTIMIZED
State Mode Select
OPEN NORMAL
OPEN NORMAL 129
OPEN NORMAL 133
OPEN NORMAL
Chapter 12. Host configuration
Errors
0 0
0
0
0 0
537