IBM V7000 Introduction And Implementation Manual page 519

Figure 11-41 shows the first panel when logged in initially. The bay ports and adapters are
displayed with ports that have logged into the switch. IBM Flex System V7000 Storage Node
occupies node bays 1-4. The positions can be verified with the CMM chassis display.
Figure 11-41 Initial FC3171 8Gb SAN Switch configuration
Figure 11-41 has the following settings indicated:
External port connection from external storage controller (IBM DS4000)
x240 compute node FC adapter in Bay 11 adapter slot 2
IBM Flex System V7000 Storage Node Network adapter 2 from each canister
Compute node bays listed with WWN ids in first row
Indicates view is shown from the 'Devices' tab
This switch has not been used before, so in this example, we are doing these tasks:
1. Creating a zoneset
2. Creating aliases
3. Creating a zone
4. Adding aliases to a zone
5. Adding a zone to zoneset
6. Activating the zoneset
Chapter 11. SAN connections and configuration
499