IBM V7000 Introduction And Implementation Manual page 186

4. Navigate to General Actions and click Launch IBM Flex System V7000 Storage Node
Manage (V7000) as shown in Figure 4-5 to start the Initial Setup wizard. If you do not see
this option, examine the Service IP setting for the storage node. For details, see 4.5.1,
"Changing the Service IP address" on page 184.
Figure 4-5 Launch Storage Manager (V7000)
5. The next window is a welcome window from the IBM Flex System V7000 Storage Node
interface, asking to either create a new system (cluster) or add to an existing system, as
shown in Figure 4-6.
Figure 4-6 IBM Flex System V7000 Storage Node first time setup welcome window
166
IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Click General Actions to
view the options.